- Description
- Specs
- accessories
The NewSonic SonoDur-R 'Rack' is a UCI hardness tester designed for complete automated, 100% checks of mass-produced parts. The 19" desktop device performs rapid process monitoring (at one-second intervals) of mix-up testing procedures. Conforms to ASTM A1038.
The SonoDur-R is mainly used to test serial parts following heat treatment, surface processing or measuring coating hardness on gravure cylinders with highly-selective low-load motorized probes.
The SonoDur-R is the world's only automated UCI measurement system that is fully system compatible thanks to its USB and fully-isolated, digital I/O interface. Good/bad sorting gates and other factors can be set up with setpoints to help facilitate your hardness inspection processes.
The SonoDur-R provides all of the features of the SonoDur2 mobile hardness testing device but can scale into a fully-automated process line.
PROBE COMPATIBILITY
All SonoDur manual and motorized probes are compatible with the SonoDur-R without restrictions. Simply connect each probe through a USB port.
*Probes and Blocks to be sold separately
MEASURING SPECIFICATIONS
Measuring principle | UCI Method, corresponds to DIN 50159, ASTM A1038 |
Test indenter | Vickers diamond 136° |
Test loads Newton scale (1kgf = 9.81 N) | Motor probes: 1N (0.1 kgf), 3N (0.3kgf) and 8.6 N (0.8 kgf) |
Hardness scales and range according to standard conversion tables Note: Conversions are acc. to ASTM E140-12bƐ1(2013), EN ISO 18265-2014, and DIN 50150-2000 (solely table 1, low-alloyed steel). Conversions into tensile strength for 98N (10kgf) test load only. | Vickers HV 10 – ca. 2000 |
Measurement uncertainty | < 3% of the average out of 5 measurements relative to the plate value |
Relative repeatability | < 3% (range relative to the average out of 5 measurements on reference block 300HV using motor probe 8.6N) |
INSTRUMENT
Processor and Memory | ARM11® i.MX35 / 128MB SDRAM / 256MB Flash / micro SD Card up to 32GB |
Operating system | Windows CE 6.0 R3 English |
Power Input | 12VDC – 24VDC // 6 W |
Display | TFT-Display 800x480 Pixel with LED-Backlight Touch-Screen |
Interfaces |
|
Interfaces | IP20 |
Instrument Language | German, English, more on request |
MECHANICAL AND ENVIRONMENTAL (INSTRUMENT AND PROBE)
Operating Temperature | Probe: 0°C to ~ +50°C |
Storage Temperature | -20°C ~ +70°C |
Humidity | Max. 90%, non-condensing |
Dimensions | Instrument ca. H/B/T 132,55 x 235,54 x 313,5mm (360mm with handle) |
Weight | Instrument ca. 3400gr |
Components of the set (without hardness measurement probe):
- SonoDur-R ‘Rack’ hardness testing device for automatic hardness testing on the production line, WIN CE operating system, 19” housing for built-in table with handles
- SONO-RM, 3m probe connector cable
- SONO-NG-24V, power supply unit 115VAC-230VAC/24VDC
- SONO-R-Stylus, stylus pen
- SONO-CD, USB product incl. instruction manual