- Description
- Specs
Single packet powdered UT couplants provide an economical solution for travel, remote access inspections and storage limitations.
EchoMix Single is a one-part (one packet) powder, easily mixed in ambient water in five minutes, providing a strong, continuous coupling film that adheres well to vertical and overhead surfaces. Single mix packet, one step mixing.
Easiest mixing powder couplant
One packet
Less residue
Blue mixing tracer
Salt stable – will not thin with corrosion salts or in marine or highway environments
Fast, easy removal with water
Low toxicity and low environmental impact
Compact for shipping and storage
Easy mixing, fast gel time in ambient water
Specifications:
Operating Range: 32˚ to 120˚F (0˚ to 50˚C)
- Viscosity: (4 liter mixture): 23,000 CPS, Brookfield #4 Spindle, 6 rpm
- pH: 9
- Corrosion Inhibition: Contains mild short term Ferrous Corrosion Inhibitors
Compliance:
- ASME Boiler & Pressure Vessel Code (T-533)
- NAVSHIPS 250-1500
- FAA-AC # 25-29 (glycerin-free)
- Less than 0.02% (200 ppm) Halogens & Sulfur
Working with EchoMix Single:
Removal: Remove with a dry rag, water and brush or pressure washer.
Air Bubbles: All powder couplants will form small air bubbles after mixing if water is not de-aired. These small bubbles usually do not negatively affect the use of the couplant and will dissipate in 3-4 days. If an air bubble-free couplant is desired immediately, use hot water and allow to stand overnight; then proceed with adding the powder couplant.
The Blue Color is a visual marker to ensure uniform distribution of the corrosion inhibitor by encouraging thorough mixing.